linksys_get_target_firmware() {
	local cur_boot_part mtd_ubi0

	cur_boot_part="$(/usr/sbin/fw_printenv -n boot_part)"
	if [ -z "${cur_boot_part}" ]; then
		mtd_ubi0=$(cat /sys/class/ubi/ubi0/mtd_num)
		case "$(grep -E "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2)" in
		kernel|rootfs)
			cur_boot_part=1
			;;
		alt_kernel|alt_rootfs)
			cur_boot_part=2
			;;
		esac
		>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
			"${cur_boot_part}" "${mtd_ubi0}"
	fi

	# OEM U-Boot for EA6350v3, EA8300 and MR8300; bootcmd=
	#  if test $auto_recovery = no;
	#      then bootipq;
	#  elif test $boot_part = 1;
	#      then run bootpart1;
	#      else run bootpart2;
	#  fi

	case "$cur_boot_part" in
	1)
		fw_setenv -s - <<-EOF
			boot_part 2
			auto_recovery yes
		EOF
		printf "alt_kernel"
		return
		;;
	2)
		fw_setenv -s - <<-EOF
			boot_part 1
			auto_recovery yes
		EOF
		printf "kernel"
		return
		;;
	*)
		return
		;;
	esac
}

linksys_is_factory_image() {
	local board=$(board_name)
	board=${board##*,}

	# check matching footer signature
	tail -c 256 $1 | grep -q -i "\.LINKSYS\.........${board}"
}

platform_do_upgrade_linksys() {
	local magic_long="$(get_magic_long "$1")"

	local rm_oem_fw_vols="squashfs ubifs"	# from OEM [alt_]rootfs UBI
	local vol

	mkdir -p /var/lock
	local part_label="$(linksys_get_target_firmware)"
	touch /var/lock/fw_printenv.lock

	if [ -z "$part_label" ]; then
		echo "cannot find target partition"
		exit 1
	fi

	local target_mtd=$(find_mtd_part "$part_label")

	[ "$magic_long" = "73797375" ] && {
		CI_KERNPART="$part_label"
		if [ "$part_label" = "kernel" ]; then
			CI_UBIPART="rootfs"
		else
			CI_UBIPART="alt_rootfs"
		fi

		local mtdnum="$(find_mtd_index "$CI_UBIPART")"
		if [ ! "$mtdnum" ]; then
			echo "cannot find ubi mtd partition $CI_UBIPART"
			return 1
		fi

		local ubidev="$(nand_find_ubi "$CI_UBIPART")"
		if [ ! "$ubidev" ]; then
			ubiattach -m "$mtdnum"
			sync
			ubidev="$(nand_find_ubi "$CI_UBIPART")"
		fi

		if [ "$ubidev" ]; then
			for vol in $rm_oem_fw_vols; do
				ubirmvol "/dev/$ubidev" -N "$vol" 2>/dev/null
			done
		fi

		# complete std upgrade
		if nand_upgrade_tar "$1" ; then
			nand_do_upgrade_success
		else
			nand_do_upgrade_failed
		fi

	}

	[ "$magic_long" = "27051956" ] && {
		echo "writing \"$1\" image to \"$part_label\""
		get_image "$1" | mtd write - "$part_label"
	}

	[ "$magic_long" = "d00dfeed" ] && {
		if ! linksys_is_factory_image "$1"; then
			echo "factory image doesn't match device"
			return 1
		fi

		echo "writing \"$1\" factory image to \"$part_label\""
		get_image "$1" | mtd -e "$part_label" write - "$part_label"
	}
}
